THE g503.com JeepDraw HOME PAGE

And thanks to Ron Fitzpatrick of g503.com we are able to now include the JeepDraw Home Pages -

- Scroll down below this Notice -

- NOTICE -

Before Requesting Drawings, Please Read This.

Changes as of September 2006

No minimum amount is payable, you pay for what you get, and you get what you pay for.

I have put an amount of US $1 nominal fee to send each drawing (each Gif Image), remember, you do not own the drawings.

Due to recent events, it is necessary that you pay for drawings before you receive them, unless we have a previous agreement to the contrary.

If you are unsure as to the amount, email me and ask.

I have also lifted the restriction of the Minimum number of drawings that can be send out, provided your email address can handle the sizes, all within reason of course, so don't ask for the lot as some have done. There's no charge for sending photos, or Technical Manual drawings.

*****UNDERSTAND THIS*****
These drawings are for personal use, they cannot be re-transmitted, copied, or used by a second person without prior  approval.*Not for Commercial Production. All Drawings are Copyright, with the usual restrictions applying.

 JeepDraw..... To be or not to be, that is the question

You do me a disservice by forwarding the drawing to a friend, if you do, and I find out, JeepDraw will be closed permanently. If you do, I will publish your name right here, and you can answer the abusive emails from those who you have just cheated out of ever receiving any drawing in the future.

I choose who I send the drawings to, and I have the last say on the matter.

I have no problem with you taking the drawings to a fabricator to have them make you the part, provided that fabricator does not make more than is required for your vehicle. Understand this fully. If you do not agree with this do not ask for a drawing, if you request a drawing it's assumed you have read this and understood it completely.
If all this is confusing to you or if a Drawing is not listed,  Email me, I might be working on it, or it may not be listed.. When requesting drawings, copy and paste the complete drawing name, including the *.gif name if applicable, into the Request Form. This helps to locate them in the library, and avoids delays in sending emails. If all this confuses you, or you have any questions email me. Should you require Photos, to help with construction, Frank, Alasdair, Claude, Mike, and many, many others have sent me pics of parts constructed from the drawings and of Original Parts that could help, so feel free to ask when requesting drawings. My apologies for not mentioning everyone.

Remember Feedback on the drawings helps everyone. Enjoy

Open the Request Form in a new Tab, Copy and paste into that your drawing list INCLUDING the *.gif name from the Sections below. I need the gif name to find the drawing in my files, if you don't include the gif name, I cannot process your request without a long delay while I search for them.

REQUEST FORM

JeepDraw Drawing List

Front Section Front Bumper to Cowl Area

Middle Section Approximately from the Cowl area to behind the front seats

Rear Section  Approximately behind the Front Seats to rear Bumperettes Includes Mounts for M31/M31C , M25,

Hole Locations Location of all Body bolt and Miscellaneous holes in the jeep tub, hood and panels

Standard Markings Stars, Hood Markings, Factory Numbers done to Order

1/4 ton Trailers Panels and parts, Lunette, Handbrake etc. New Drawings Added March '07

Miscellaneous
Radio-Tools-Canvas   MP50, Miscellaneous Tools and Canvas Items to Make

Sample Drawings Canadian Headlight shield  Rear Number/Licence Plate Bracket

IF YOU HAVE ANY PROBLEMS FINDING A DRAWING, PLEASE EMAIL ME DIRECT

If you want to make sheet metal pieces and have no way of making neat, clean folds, Click on the link to make a home made Sheet Metal Brake, just right for those small jobs. Other Shop Plans also available from this site at no cost.

Vintage Farm Plans

JeepDraw Home Pages

Ongoing Project :- Colour and Finish of jeep parts  Updated April 5th 2008

On going project of metal sheeting used.